Your garage door may not be closing smoothly because of rust, faulty or old hinges, improper rollers, or clogged dirt. This can happen due to abrupt weather changes, untimely garage door maintenance, or carefree usage.
Considering you use the car frequently and need the door to slide open and close appropriately, take these garage door maintenance tips seriously. The last thing you want in your busy life is delays owing to such problems
Garage Maintenance: 7 Tips for a Smoother Garage Door
We, at SD Garage Doors based in Glasgow, have curated a list of 7 garage door maintenance tips to ensure you aren’t burdened with jammed doors:
#1. Tighten All The Hardware
Assume an average family uses their garage door twice a day for more than a few years. This sums up to over a thousand door closing and opening movements. If not rust or chunks of gathered dirt, the hardware will undoubtedly face wear and tear to some extent.
As garage doors are heavy, sliding them from top to bottom or left to right induces significant vibrations. These vibrations loosen the nuts and bolts, and eventually, the hardware remains loosely attached – becoming susceptible to breakage.
Make sure to pay close attention to the fittings and double-check whether the roller brackets and bolts are tight. If they are even slightly loose, tighten them with a socket wrench.
#2. Replace Weatherstripping
After prolonged usage, there’s a high chance of damage to the weather sealing on the borders of your garage door. Even worse, it may seem undetectable due to brittleness or may already be cracked within tight areas. This restricts you from identifying the loopholes in your garage door.
We suggest visiting any hardware or home improvement store and purchasing weatherstripping material by the foot, based on the dimensions of your garage door. Ideally, seal the entire bordering to avoid any pollutants and external agents from seeping into your home.
#3. Periodic Lubrication
Whether yearly or bi-yearly, make it a point to add grease to the necessary parts of the garage door. Such greasing extends the lifespan of your garage doorway beyond expectations. What’s best, it brings the benefit of day-in-day-out comfort due to seamless manoeuvrability.
Lubrication should be performed on the chain sections, screwed parts, and the main components that support sliding the door. Feel free to apply silicone or white lithium grease/lubricant sprays for best results.
Spray lubricants make the door maintenance process much more straightforward, and they also help eliminate the annoying problem of noisy garage doors. Provided the product you apply is of high-quality, expect waterproofing and material preservation benefits too.
#4. Understand the Balance of The Garage Door
The overhead door in your garage will struggle to slide if the garage door isn’t balanced. To extend the usage period of the door and ensure smooth operation, we recommend testing the door’s balance.
This can be done by first pulling the release handle in order to disconnect the opener. Further on, attempt opening the door manually and focus on how stably it slides upwards. In case the door wobbles in a side-to-side or front-to-back motion, the door is not well-balanced. However, if it moves without losing its stability, all is well.
In the event the door isn’t balanced correctly, you’ll need to adjust the springs.
Caution: Only perform this string adjustment exercise when the door is closed down, and the springs are under tension.
#5. Check The Auto-Reverse Feature
The auto-reverse function of garage doors is a safety feature that automatically gets activated if it comes into contact with an object while closing. You can place a significantly large object between the door’s top section and the ground and test to see how functional it is.
This garage door feature is imperative as it avoids damaging your car while parking and keeps your pets and kids safe.
In the 21st century, the better half of garage doors function with a photoelectric system that works on the principle of detection. Simply put your foot or palm in the way and wait for the door to go into auto-reverse. If it doesn’t, then you’ve diagnosed a technical problem that should be resolved immediately.
#6. Groom The Garage Door After Inspection
Besides the technicalities of an electronic or automatic garage door, keep an eye out for structural damages as well. For example, wooden garage doors can be a victim of warp symptoms, chipping, lacklustre paint finishes, and even water damage.
On the other hand, steel-themed doors can display rusted edges or ugly brown chippings that may fall on your car or the garage entry. Don’t let these deformities worsen, and treat them as soon as possible through priming, painting, sanding, or whichever treatment best suits the door type.
Also, since one side of the garage door is exposed to the outdoor environment, you must clean it monthly. Try and stick to a mild all-purpose cleaner for best results.
#7. Check and Maintain The Rollers
For regular garage door users, do replace the rollers every four to five years. Whereas, if you open the garage door twice or thrice a week, replace them every seven years. All of this is irrespective of whether the rollers are made of nylon or steel.
Strictly stick to the roller brackets that have no connection to the cable system. Messing with the cable system is best done by professionals, and you don’t want a malfunctioning garage door risking your precious vehicle.
If you begin hearing squeaking or dragging noises from the area where the rollers are located, lubricate them. If not, lubricating twice a year is enough to avoid such instances.
A lot was invested into designing your garage, installing the garage door, and more than everything, purchasing that vehicle of yours. Never compromise on garage door maintenance, and you’ll be gliding in and out of your garage as swiftly as ever. In the silly event that you do compromise, be assured, the garage door will fail to stand the test of time!